Home > Spares & Accessories > Saw Blades Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Amada
  • Model:
  • Axcela H (AP) carbide tipped blade from Amada
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:
  • N/A

DESCRIPTION

AXCELA-H-NSR1N X : Standard item o : Separate order required * The WS (Wide set) type blade is a special saw blade with a measure against pinching which occurs easily when cutting the roll formed large size H-beam (applicable to H-beam whose width is over 400mm and mainly intended for that of 600mm or more width). Using of the WS type blade for cutting the material where no pinching would occur may shorten the service life of the blade. These specifications and appearance are subject to change without notice for reason of improvement.
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      Amada
      Model:
      Axcela A carbide tipped blade for aluminium from Amada
      Description:
      Carbide tipped bandsaw blade especially developed for sawing solid aluminium materials. These specifications and appearance are subject to change without notice for reason of improvement.

      More Info

    • Manufacturer:
      Amada
      Model:
      Amada Axcela G carbide tipped bandsaw blade
      Description:
      Amada AXCELA G High-performance coated carbide tipped bandsaw blade for metal cutting band saws. Quality saw blades for performance sawing of difficult-to-cut materials such as stainless steel and hot work die steel materials at a high cutting rate H...

      More Info

    • Manufacturer:
      Model:
      HSS circular saw blade coated – Julia – Grey Shark
      Description:
      HSS circular saw blade coated with a 2.5 µm thickness Titanium/Carbon plasma which gives to it the high hardness of 3.000 Vickers (HV 0.05). The friction coefficient (0.22) is very low, thanks mainly to the strong presence of Carbon; this characteri...

      More Info

    • Manufacturer:
      Dah Lih
      Model:
      Dah Lih DCM-2213
      Description:
      {"Table Size": "2500mm x 1350mm", "X Axis": "2200mm", "Y Axis": "1300mm", "Z Axis": "760mm", "Spindle Speed": "3500rpm, 6000rpm, 8000rpm, 10000rpm, 12000rpm, 15000rpm", "Spindle Motor": "15hp, 25hp, 30hp, 35hp", "Spindle Type": "BBT 40, BBT 50 or DIN...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User